![]() Visit and log in with your meShare user account information. You can also access your devices from any web browser with our web app. Just download the meShare app from Google PlayTM or the App StoreTM. You can access your camera and other devices by using the meShare app with any AndroidTM or iOS® device. Enjoy more smart features in the future!Īll of your meShare devices will be bound to your meShare user account.Access your footage and clips at any time from any location.Create and save video clips from your recordings.Record continuously and store the footage on our secure cloud servers. ![]() Please visit for information and articles about the meShare Cloud Service. This camera is compatible with the meShare Cloud Service. You can rotate the camera for a better viewing angle. The LED status light will light up when it powers on. Connect the supplied power adapter to the power port, and plug the adapter into a nearby power outlet.Fasten the three screws through the holes on the bracket and the anchors as shown. The tip of the anchors should be flush against the wall. Drill three holes slightly smaller than the provided wall anchors and use a hammer to gently insert the anchors into the wall. Line the bracket against the wall and mark the appropriate holes.Remove the three screw plugs on the bracket and keep the holes exposed.Your device has been successfully configured! Tap “Done” to finish. It is not required, but it is highly recommended. You will not need to use this password when accessing your devices from the meShare app. Note: The password provides an additional layer of security for your devices. Name your device and set a password for it. The distance between your phone and the meShare camera should be about 8 inches. Steadily hold your phone’s display in front of your meShare camera until you hear “Device connected”. Note: The WiFi password is case-sensitive. Please make sure that your WiFi password is correct. Tap “Next” to proceed.Įnter the password of the WiFi network that you want your device to connect to. Tap “Next” to proceed.Ĭonnect your phone to the 2.4GHz WPA-PSK/WPA2-PSK WiFi network that you want your device to connect to (network cannot be hidden). Turn up the volume on your phone to hear voice prompts during the mobile setup process. Scan this QR code shown below when prompted by the app. The status light will blink green when the device has powered on. Log in and press the Add Device + option in the upper right corner of the Home Page. Power on your camera with the supplied power adapter.All of your devices will be bound to this account. Launch the app and sign up for a free meShare account. Download and install the “meShare” app from Google PlayTM or the App StoreTM (compatibility: iOS ® 7.0+ or Android TM 4.0+).Make sure your network has at least 2Mbps upload speed for each camera when live viewing or 4Mbps upload speed for each camera when using the meShare Cloud Service.Make sure you know the SSID (WiFi network name) and password of the 2.4GHz WPA-PSK/WPA2-PSK WiFi network that you want your camera to connect to.Make sure that you have a strong WiFi connection at the location of your camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |